PRODUCT INFORMATION DATA SHEETS

DOLPHIN GLAZE

Brushable/Pourable Polyester Putty

DESCRIPTION: Dolphin Glaze is a two component chemical liquid used for the final skimming of a polyester body putty repair or for direct application onto minor imperfections on bodywork prior to over-painting. Dolphin Glaze is designed for the professional user and combines excellent levelling properties together with easy sanding.

SURFACE PREPARATION AND INSTRUCTIONS FOR USE: Dolphin Glaze polyester putty can be used on the following surfaces:-

• Bare steel-degrease and abrade with P80 paper
• Galvanised and other Zinc coated steels-degrease and abrade with P120 paper
• Aluminium-degrease and sand with P120 paper. Do not apply over etch primer.
• Original paint surfaces-degrease and abrade with P180 paper.

MIXING RATIO: 100 parts by weight Dolphin Glaze polyester filler, 2 parts by weight U-POL hardener for polyester fillers. The exact mixing ratio is not critical, although over or under catalyzation may affect the gel time. Dolphin Glaze is a thick liquid and should be mixed in small quantities on a flat non-porous surface. To obtain optimum results apply the mixed liquid in small quantities to form a thin film-during cure surface imperfections will flow out to leave a level repair which requires only a small amount of sanding.

POT LIFE: Once mixed, 4-5 minutes at 20°C with 2% hardener.

TOOLS: Mixing board, filler knife, plastic or rubber spreader.

DRYING TIME: Sandable after 30 minutes at 20°C.

OVER-PAINTING: Dolphin Glaze polyester filler can be over-painted with most paint systems.