PRODUCT INFORMATION DATA SHEETS HIGH#5 Ready to Use High Build Primer DESCRIPTION: High#5 is a 1K ready to use high build primer/filler in an aerosol. It is used for priming uneven surfaces before top coating. High#5 is capable of producing a coating of a film thickness similar to that of a spray gun applied primer. The convenience of using a high build primer in an aerosol means that masking is kept to a minimum. Mixing paint and cleaning spray equipment are avoided as of result of using High#5 leading to savings in time and materials. High#5 is chromate free and easy to sand. SURFACE PREPARATION AND INSTRUCTIONS FOR USE: High#5 can be applied to the following surfaces:- - Fully cured paint
- Polyester bodyfillers and G.R.P.
Thoroughly clean and degrease surfaces with a suitable spirit wipe or thinner. Abrade wet or dry with 280-320 abrasive, re-clean, dry and degrease. APPLICATION: Shake can thoroughly before use for a minimum of 2 minutes. Apply 1-2 light even coats. Allow 5-10 minutes flash off time between coats. DRYING TIME: Allow 10-20 minutes before over-coating. Drying time is dependant upon film thickness, humidity and temperature. OVER-PAINTING: High#5 should be flatted wet with 600-800 or dry with 400-600 abrasive. High#5 may be over-painted with most paint systems. | 
