PRODUCT INFORMATION DATA SHEETS

SYSTEM 20  CLEARCOAT

Is a medium solids two component acrylic coating.
It can be applied undiluted or it can be thinned up to 10%, it has good flow and
non-sag properties.
It hardens rapidly to give a high build, U.V. resistant coating with excellent gloss
and long term durability.
Can be air dried, low baked or I.R. cured.
Is easy to polish once cured.


Preparation of the surface;
Cured paint:

  1. Wet flat P800-1000 or Dry flat P600-800.
  2. Clean off sanding residues.
  3. Degrease.
  4. Clean with tack rag.
     
Mixing Ratio 2080:2030

S2080:2030
2:1

Spray Tip1.4-1.8
Viscosity DIN 4/sec.15-17
Air Pressure/Bar4
Coats2-3
Build/microns.40-50
Flash Off/min.5-10
Tack Free/min.60
Through Dry Air/hours12-14
Through Dry 60°C/min.30
Through Dry I.R./min.15
Pot-Life/hours4-6


Temperature Range for Use of System 20 2030 Series Hardeners:

Temp °C-50510152025303540+45
Hardener           
2031           
2030           
2032           
2033